This page as an PDF-Document? Click on that Symbol and wait a little moment... --->

Video Monitor


See also: MikroKopter-Boards

Inhaltsverzeichnis

  1. Monitor
  2. Connections
  3. Mounting Clip



Monitor

A specially adapted Monitor for the MikroKopter you can buy at the online store.
This Monitor is available in two different versions:

oder

Connections

Both monitors have the following connections:

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=122979&g2_serialNumber=2

  • Power "OUT"
    • 3.5mm or 5mm (depending on monitor). Connect to "Power IN" of the Video receiver
  • Video "IN" (3.5mm plug)
    • Connect to "Video out" of the Video receiver
  • Video "IN" (Cinch)
    • Additional video Input e.g. for an external player
  • Power "IN"
    • Power in Monitor
  • LipoSaver

    • to safe the lipo against undervoltage or damage connect the LipoSaver between the Balance plug of the Lipo 4S Lipo and the "Power IN" of the monitor

  • Audio "IN"
    • Input speaker. This plug you can connect e.g. to the Graupner MX-20 to hear the voice of the telemetry

Important

Use this Monitor only with a 4S Lipo.
If you use a 3S Lipo and the power is too low, the monitor can have a malfunction.

Mounting Clip

Very easy you can install the clip that consists of 4 parts.

First you have to insert the upper holder into the rail and rotate it by 90°. During this you should depress the holder slightly in the center.
(Click on graphic to enlarge)

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123050&g2_serialNumber=1 http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=122985&g2_serialNumber=2 http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=122990&g2_serialNumber=1


In the next step you can insert the lower holder.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=122995&g2_serialNumber=1 http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123000&g2_serialNumber=1


Now the left and right holders can be inserted. NOTE: This requires some effort.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123005&g2_serialNumber=1 http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123010&g2_serialNumber=1


The attached rubber ring which hold the Lipo, can be inserted in the hooks.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123015&g2_serialNumber=1


Insert the video receiver with the bottom first into the holder. Also insert the Lipo.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123020&g2_serialNumber=1 http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123025&g2_serialNumber=1 http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123030&g2_serialNumber=1


At the end connect all together.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=123035&g2_serialNumber=1